Cisco TelePresence Touch 10 TTC5-09 10.1" Controller for Webex Room Kit | Wty
Cisco TelePresence Touch 10 TTC5-09 10.1" Controller for Webex Room Kit | Wty
Cisco TelePresence Touch 10 – 10.1" Touch Controller for Cisco Video Systems
A 10.1-inch capacitive touch controller for Cisco video conferencing systems, used to start calls, share content and manage meetings with a tap. It is powered over Ethernet from an 802.3af PoE source and backed by a 12-month warranty from Reboot IT.
Key Benefits
- 10.1-inch touchscreen – a 1280x800 capacitive display that is easy for anyone in the room to use.
- One-tap meetings – join calls, dial contacts and share content without a remote.
- PoE powered – a single network cable provides power and connection — no power pack on the table.
- Broad compatibility – controls Cisco MX, SX and IX Series systems, Webex Room Kits, Room 55/70 and Webex Board.
- Tidy table layout – a low-profile controller that sits neatly on a meeting table.
- Spare or replacement unit – a cost-effective way to replace a damaged or missing room controller.
Performance in Use
The Touch 10 is the controller most Cisco video rooms are built around. Instead of hunting for a remote, anyone in the meeting can tap to join a scheduled call, dial a contact, share a laptop screen or adjust the call from the 10.1-inch touchscreen in front of them.
Installation is straightforward: the controller takes its power from an IEEE 802.3af PoE port and connects to the room system, so the only cable on the table is a single network lead. That keeps meeting tables clean and makes it easy to position the controller where people actually sit.
For IT teams maintaining a Cisco video estate, a tested Touch 10 is a practical spare to keep on the shelf. When a room controller is damaged or goes missing, swapping in a replacement gets the room back into service quickly without buying a new system.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | Cisco TelePresence Touch 10 (TTC5-09) |
| Display | 10.1" capacitive touchscreen, 1280x800 |
| Power | Power over Ethernet, IEEE 802.3af |
| Connection | RJ45 Ethernet |
| Compatible Systems | Cisco MX, SX and IX Series; Webex Room Kit, Room Kit Plus, Room 55/70; Webex Board |
| Software Requirement | TC7.3.11 or later, or CE8.3.3 / CE9.1.1 or later on the video system |
| Warranty | 12 months, Reboot IT |
Is It Right For You?
| Best For ✓ | Not For ✗ |
|---|---|
| Cisco video rooms that need a spare or replacement controller | Use on its own – it needs a Cisco video system to control |
| Webex Room Kit and SX Series meeting rooms | Sites without an 802.3af PoE source |
| IT teams maintaining a Cisco collaboration estate | Non-Cisco conferencing systems such as Zoom Rooms hardware |
| Labs building a complete Cisco video test setup | Video systems running software older than TC7.3.11 |
Condition Grades
| Grade | What to Expect |
|---|---|
| A – Excellent | Excellent to very good cosmetic condition. May show light scratches or minor marks. Fully tested and working. |
| B – Good | Good cosmetic condition with visible signs of use such as scratches, scuffs, marks or discolouration. Fully tested and working. |
Frequently Asked Questions
Does the Touch 10 work on its own?
No. It is a controller for a Cisco video conferencing system such as an SX, MX or Webex Room Kit endpoint.
How is it powered?
It is powered over Ethernet and needs an IEEE 802.3af PoE source, such as a PoE switch port or injector.
Which software version does my system need?
The video system should be running TC7.3.11 or later, or CE8.3.3 / CE9.1.1 or later.
What size is the screen?
It has a 10.1-inch capacitive touchscreen with 1280x800 resolution.
Are cables included?
The controller is supplied on its own. Use a standard network cable to connect it.
How much does shipping cost?
Standard shipping is free Australia-wide. Faster options are available at checkout.
Warranty & Support
This Cisco TelePresence Touch 10 is covered by a 12-month warranty from Reboot IT on a return-to-base basis, covering hardware faults for the first year of ownership. Standard shipping is free Australia-wide.
Reboot IT has been refurbishing business IT equipment in Melbourne since 2001. Every unit is tested and graded by our technicians before it is listed, and our local team is here to help with questions about setup and compatibility. Visit reboot-it.com.au for more.