White River Hardwoods · Hardwood Mouldings
Crown - CM82 Cornice Moulding
SKU LCD8047 · 8-1/4″ W × 4-3/4″ D
Hardwood Moulding · Cast Resin
Crown - CM82 cornice moulding for the wall-to-ceiling line, cast in flexible resin in 8-1/4″ W × 4-3/4″ D. Ships unfinished, ready to paint or stain.
Real wood, real grain, milled in long lengths — so a cornice run reads as one continuous piece instead of a row of splices.
Available Options
Material & Dimensions
| SKU |
Material |
Profile |
| LCD8047-RESIN |
Resin |
8-1/4″ W × 4-3/4″ D |
Resin ships unfinished and accepts paint or stain. Limited Red Oak profiles are stocked only in the Embossed and Traditional Collections.
Construction
How This Profile Is Made
Flexible Resin
The Resin option is cast from the original wood profile, so it carries the same detail and grain pattern and can be stained or painted. It flexes to follow radius walls and arched openings, compensates for framing that isn't true, and will not rot, swell, or deteriorate — rated for interior and exterior use, including bathrooms and sunrooms. The higher price reflects the specialized molding process and the material itself.
Why This Profile
The Profile in Detail
✦
Long Stock Lengths
Milled in lengths up to 16′, so most runs go up without a splice. Fewer joints, cleaner line, less filling.
◇
Paint or Stain
Poplar takes paint cleanly and stains evenly. Ships unfinished so the finish is yours to choose.
⊢
Standard Tooling
Cuts, copes, and fastens like any hardwood trim. No special blades or adhesives.
↩
Flexible Resin Option
Molded from the original wood model, so it carries the same grain and profile. The flexible resin bends to follow curved walls and out-of-plane framing, won't rot or swell, and is rated for interior and exterior use — bathrooms, sunrooms, and damp locations included.
Installation
Step by Step
1
Acclimate
Store flat in the room for 48–72 hours before cutting. Poplar milled to 6–8% moisture will move if installed straight off a truck.
2
Prime Before Install
If painting, prime all faces and cut ends first. Back-priming stops moisture from moving in behind the finish.
3
Cope Inside Corners
Cope rather than miter inside corners on wood. A coped joint stays tight through seasonal movement; a miter opens.
4
Fasten Into Framing
Nail or trim-screw into framing every 16″. Glue miters at outside corners.
5
Fill & Sand
Fill nail holes with wood filler, sand flush, and spot-prime before top-coating.
6
Finish
Two coats of trim enamel, or stain and clear-coat. Poplar takes gel stain particularly evenly.
Trade Program
38% Trade Discount for Design Professionals
Architects, interior designers, builders, and contractors receive 38% off list on hardwood mouldings. Apply once and your account is set for every order.
Apply for Trade Access
Care & Handling
Keep bundles flat and supported until installed. Resin is rated for interior and exterior use. Dust with a dry cloth. Finished moulding can be wiped with a barely damp cloth.
LCD8047 — Crown - CM82. Milled by White River Hardwoods.
