White River Hardwoods · Traditional Mouldings
Baseboard - PM622 Base Moulding
SKU LCD4334 · 1-1/2″ D × 11″ W
Traditional Collection · Solid Poplar · Milled in Fayetteville, Arkansas
Baseboard - PM622 base moulding from the Traditional Collection for the wall-to-floor line, milled from kiln-dried Poplar in 1-1/2″ D × 11″ W. Ships unfinished, ready to paint or stain.
Real wood, real grain, milled in long lengths — so a baseboard run reads as one continuous piece instead of a row of splices.
Available Options
Material & Dimensions
| SKU |
Material |
Profile |
| LCD4334-POPLAR |
Poplar |
1-1/2″ D × 11″ W |
Poplar ships unfinished. Limited Red Oak profiles are stocked only in the Embossed and Traditional Collections.
Construction
How This Profile Is Made
Traditional
Traditional mouldings are milled from solid Poplar. They install with standard woodworking tools and accept paint or stain.
Lumber & Machining
All White River Hardwoods hardwood mouldings are milled from clear, kiln-dried hardwood lumber, NHLA graded and dried to 6–8% moisture content. Roughly 65% of the lumber runs 12′ to 16′, which is what lets us produce stock mouldings in overall lengths from 3′ to 16′. Profiles are precision machined on Weinig moulders with Weinig knife tooling.
Why This Profile
The Profile in Detail
✦
Long Stock Lengths
Milled in lengths up to 16′, so most runs go up without a splice. Fewer joints, cleaner line, less filling.
◇
Paint or Stain
Poplar takes paint cleanly and stains evenly. Ships unfinished so the finish is yours to choose.
⊢
Standard Tooling
Cuts, copes, and fastens like any hardwood trim. No special blades or adhesives.
⊕
Curved Work Available
Radius and curved versions of this profile can be produced for arched openings and curved walls. Ask your rep.
Installation
Step by Step
1
Acclimate
Store flat in the room for 48–72 hours before cutting.
2
Scribe to the Floor
Scribe the bottom edge where floors are out of level; leave a gap if flooring goes in after.
3
Cope Inside, Miter Outside
Cope inside corners; miter and glue outside corners.
4
Fasten Into Framing
Nail into studs and the bottom plate every 16″.
5
Fill & Sand
Fill nail holes, sand flush, spot-prime.
6
Finish
Trim enamel wears best at floor level.
Trade Program
38% Trade Discount for Design Professionals
Architects, interior designers, builders, and contractors receive 38% off list on hardwood mouldings. Apply once and your account is set for every order.
Apply for Trade Access
Care & Handling
Keep bundles flat and supported until installed. Interior use for Poplar; choose the resin option for damp or exterior locations. Dust with a dry cloth. Finished moulding can be wiped with a barely damp cloth.
LCD4334 — Baseboard - PM622, Traditional Collection. Milled by White River Hardwoods.
